Raytac's nRF54L15 QFN module spectrum covers AN54LQ-15, AN54LQ-P15 and AN54LQ-U15 series with Chip Antenna, PCB Antenna and u.FL connector for External Antenna options for selection.
Highlights of nRF54L15 Solution
* 128 MHz Arm® Cortex®-M33 processor
* Scalable memory configurations up to 1.5 MB NVM and up to 256 KB RAM
* Multiprotocol 2.4 GHz radio supporting Bluetooth Low Energy, 802.15.4-2020, and 2.4 GHz proprietary modes (up to 4 Mbps)
* Comprehensive set of peripherals including new Global RTC available in System OFF, 14-bit ADC, and high-speed serial interfaces
* 128 MHz RISC-V co-processor
* Advanced security including TrustZone® isolation, tamper detection, and cryptographic engine side-channel leakage protection
* Security PSA Level 3
For customers looking for Good form factor may select AN54LQ series module
AN54LQ-15 deployed Chip Antenna and offers an excellent connectivity ability.
AN54LQ-P15 deployed PCB Antenna and offers a good connectivity ability.
AN54LQ-U15 deployed u.FL connector for External Antenna and offers a super long range connectivity ability
AN54LQ-DB-15 demo board is designed for quick testing and debugging without building your own board. The board is only available with AN54LQ-15 (Chip Antenna) module.
For customers looking for Smaller form factor may select AN54LV series module
AN54LV-15 deployed Chip Antenna and offers an excellent connectivity ability.
AN54LV-P15 deployed PCB Antenna and offers a good connectivity ability.
AN54LV-U15 deploys u.FL connector for External Antenna and offers a super long range connectivity ability.
AN54LV-K15 deploys Antenna Pin and offers designers for customized antenna design.
AN54LV-DB-15 demo board is designed for quick testing and debugging without building your own board. The board is only available with AN54LV-15 (Chip Antenna) module.
AN54LQ-P15 is a BT 6 stack (Bluetooth low energy or BLE) module designed based on Nordic nRF54L15 SoC solution, which incorporates: GPIO, QSPI, SPI, UART, I2C, I2S, PDM, PWM, ADC and NFC interfaces for connecting peripherals and sensors.
Features
- Dual Transmission mode of BLE & 2.4GHz RF upon customer's preference.
- Compact size with (W) 9.5 x (L) 13.7 x (H) 1.8mm
- Low power requirements, ultra-low peak, average and idle mode power consumption.
- Supports Bluetooth 6.0, IEEE 802.15.4 & 2.4Ghz RF & ANT & upon customer's preference.
- Pre-Certified Module: FCC / IC / CE / Telec / KC / SRRC / NCC / WPC Certified & CE RED / RCM Compliant.
- Highly flexible multiprotocol SoC ideally suited for Bluetooth® Low Energy and 2.4GHz ultra-low-power wireless applications.
Quick Specifications
- 128 MHz ARM® Cortex™ processor with TrustZone® technology
- Supply: 1.7V – 3.6V
- Flexible and configurable 31 GPIOs
- Bluetooth 6.0(Intended), IEEE 802.15.4-2020, and 2.4 GHz transceiver
• -96dBm sensitivity in 1Mbps Bluetooth low energy (BLE) mode
• -104 dBm sensitivity in 125 kbps Bluetooth Low Energy mode (long range) with a 0.1% bit error rate
• -102 dBm typical sensitivity in IEEE 802.15.4
• Up to +8 dBm TX power; 1 dB step size from -8 dBm to +8 dBm
• RSSI (1dB resolution)
- Supported data rates:
• Bluetooth 6.0: 2Mbps, 1 Mbps, 500 kbps, 125 kbps
• IEEE 802.15.4-2020: 250 kbps
• Proprietary 2.4 GHz: 4 Mbps, 2 Mbps, 1 Mbps
• Advanced on-chip interfaces
• RISC-V Coprocessor
• Global RTC (GRTC) that can run in System OFF mode and implement a shared system timer
• Seven 32-bit timers with counter mode
• Up to five fully featured serial interfaces with EasyDMA, supporting I2C, SPI controller/peripheral, and UART
• One high-speed SPIM up to 32 MHz, four up to 8 MHz
• One high-speed UARTE up to 4 Mbps, four up to 1 Mbps
• I2C up to 400 kHz
• Three pulse width modulator (PWM) units with EasyDMA
• I2S two channel Inter-IC sound interface
• ADC with up to eight programmable gain channels. 14-bit at 31.25 ksps,
12-bit at 250 ksps, and up to 10-bit at 2 Msps
• Pulse density modulation (PDM) interface
• Near field communication (NFC)
• Up to two quadrature decoders (QDEC)
• Comparator and low-power comparator with wake-up from System OFF mode
• Temperature sensor
- Operating Temp: -40°C to +105°C
- Platform security
• Secure/non-secure memory protection
• Symmetric and asymmetric key crypto accelerator
• ecure key management
• Tamper detection
• Immutable boot partition
• Debug access port protection
• Two watchdog timers for secure and non-secure access
